Conference Proceedings

2023

to be updated

2022

to be updated

2021

Suk, W., Karakalas, A. A., & Lagoudas, D. C. (2021). Comparison of linear and torsional SMA actuators for morphing applications. Active and Passive Smart Structures and Integrated Systems XV.
Zhou, Tianyang, Boyd, James G., & Lagoudas, Dimitris C. (2021). Energy-based multifunctional efficiency metric for multifunctional composite anodes in structural batteries. American Society for Composites 2021.
DiPalma, M., & Gandhi, F. (2020). Autonomous camber morphing of a helicopter rotor blade with temperature change using integrated shape memory alloys. Journal of Intelligent Material Systems and Structures, 32(5), 499–515.
Karakalas, A. A., & Lagoudas, D. C. (2021). Preliminary design and numerical investigation of SMA torsion tubes for the actuation of articulated adaptive panels. AIAA Scitech 2021 Forum.

2020

Wilson, G., Lagoudas, D., & Hartl, D. (2020). Designing a morphable parabolic reflector antenna using origami-inspired discretization and efficient global optimization. ASME 2020 Conference on Smart Materials, Adaptive Structures and Intelligent Systems.
Karakalas, A. A., Machairas, T. T., Lagoudas, D. C., & Saravanos, D. A. (2020). Design of morphing strips using SMA actuators under partial phase transformation operation. ASME 2020 Conference on Smart Materials, Adaptive Structures and Intelligent Systems.
Karakalas, A., & Lagoudas, D. (2020). Effect of tension-compression asymmetry and partial transformation on the response of shape memory alloy beam structures. Behavior and Mechanics of Multifunctional Materials IX.
Martin, D., Xu, L., & Lagoudas, D. C. (2020). Phase transformation characteristics of high-temperature shape memory alloy under tension, compression, and bending actuation cycling. AIAA Scitech 2020 Forum.

2019

Haghgouyan B, Young B, Karaman I, Lagoudas DC. Fracture toughness of martensitic NiTiHf high-temperature shape memory alloy. In Behavior and Mechanics of Multifunctional Materials and Composites XII 2019 Mar (Vol. 10968, p. 109680A). International Society for Optics and Photonics.
Joy JK, Cruzado A, Solomou A, Benzerga AA, Lagoudas DC. Representative volume size in micromechanical modeling of precipitated SMAs. In Smart Structures and NDE for Energy Systems and Industry 4.0. 2019 Mar (Vol. 10973, p. 109730D). International Society for Optics and Photonics.
Xu L, Solomou A, Baxevanis T, Lagoudas DC. A three-dimensional constitutive modeling for shape memory alloys considering two-way shape memory effect and transformation-induced plasticity. In AIAA Scitech 2019 Forum (p. 1195).

2018

Haghgouyan B, Karaman I, Jape S, Solomou A, Lagoudas DC. 2018, September. Crack Growth Behavior in NiTi Shape Memory Alloys under Mode-I Isothermal Loading: Effect of Stress State. In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (pp. V002T02A013-V002T02A013). American Society of Mechanical Engineers.
Fernandes, R, Boyd JG., Lagoudas DC, El-Borgi S. 2018, September. Plane strain sliding contact between a rigid cylinder and a pseudoelastic shape memory alloy half-space. In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(pp. V002T02A015-V002T02A015). American Society of Mechanical Engineers.
Phillips FR, Martin D, Lagoudas DC, Wheeler RW. 2018, September . Modeling of Internal Damage Evolution during Actuation Fatigue in Shape Memory Alloys. In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(pp. V002T02A008-V002T02A008). American Society of Mechanical Engineers.
Xu L, Baxevanis, T, Lagoudas DC. 2018, September. A three-dimensional constitutive model for polycrystalline shape memory alloys under large strains combined with large rotations. In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(pp. V002T02A007-V002T02A007). American Society of Mechanical Engineers.
Sessions DM, Ruff JT, Espinal FA, Huff GH, Jape S, Peraza-Hernandez EA, Lagoudas DC, Hartl DJ, Borges B. 2018, July. Folding, Tessellation, and Deployment of an Origami-Inspired Active-Material-Enabled Self-Folding Reflector Antenna. In 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting (pp. 929-930).
Haghgouyan B, Jape S, Hayrettin C, Baxevanis T, Karaman I, Lagoudas DC. Experimental and numerical investigation of the stable crack growth regime under pseudoelastic loading in shape memory alloys. In Behavior and Mechanics of Multifunctional Materials and Composites XII 2018 Mar 22 (Vol. 10596, p. 1059612). International Society for Optics and Photonics.
Phillips FR, Wheeler R, Lagoudas DC. Damage evolution during actuation fatigue in shape memory alloys. In Behavior and Mechanics of Multifunctional Materials and Composites XII 2018 Mar 22 (Vol. 10596, p. 1059608). International Society for Optics and Photonics.
Mohajeri M, Castaneda H, Lagoudas DC. Corrosion monitoring of NiTi alloy with small-amplitude potential intermodulation technique. In Behavior and Mechanics of Multifunctional Materials and Composites XII 2018 Mar 22 (Vol. 10596, p. 1059616). International Society for Optics and Photonics.
Joy JK, Solomou A, Baxevanis T, Lagoudas DC. Constitutive response of precipitation hardened Ni-Ti-Hf shape memory alloys through micromechanical modeling. In Active and Passive Smart Structures and Integrated Systems XII 2018 Mar 15 (Vol. 10595, p. 105952G). International Society for Optics and Photonics.
Haghgouyan B, Hayrettin C, Baxevanis T, Karaman I, Lagoudas DC. On the experimental evaluation of the fracture toughness of shape memory alloys. In TMS Annual Meeting & Exhibition 2018 Mar 11 (pp. 565-573). Springer, Cham.
Mohajeri M, Haghgouyan B, Castaneda H, Lagoudas DC. Nickel Titanium Alloy failure analysis under thermal cycling and mechanical Loading: A Preliminary Study. arXiv preprint arXiv:1803.01110. 2018.
Mohajeri M, Lopez HC, Lagoudas DC. Evolution of passive film behavior on mechanically polished NiTi shape memory alloy during forward martensitic transformation. arXiv preprint arXiv:1802.09606. 2018.
Joy JK, Solomou A, Baxevanis T, Karaman I, Lagoudas DC. Micromechanical Modeling of Precipitation Hardened NiTiHf. InMaterials Science Forum 2018 (Vol. 915, pp. 147-156). Trans Tech Publications.
Lagoudas DC , and Xu L “Constitutive modeling of polycrystalline shape memory alloys incorporating transformation-induced plasticity: a unified approach,” International Conference on Plasticity, Damage, and Fracture 2018, January 3-9, 2018, Puerto Rico.

2017

PERAZA HERNANDEZ E. A., HARTL, D. J., AND LAGOUDAS, D. C., “Analysis and design of an active self-folding antenna,” Proceedings of the ASME 2017 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE 2017), DETC2017-67855. Cleveland, OH, August 6 – 9,
Xu L., Solomou A., Baxevanis T., Lagoudas D., “A Logarithmic Strain Based Constitutive Model for Phase Transformation Materials with Large Accumulating Irrecoverable Strains under Cyclic Loading “, 54th The Society of Engineering Science Technical Meeting, July 25-28, 2017, Boston, MA, USA.
Xu L. , Baxevanis T., Lagoudas D.,”A 3D Finite Strain Constitutive Model of Shape Memory Alloys Incorporating Transformation Induced Plasticity under Cyclic Loading”, International Conference on Martensitic Transformation, July 9-14, 2017, Chicago, IL, USA.
Xu L. , Baxevanis T., Lagoudas D., “A Finite Strain Constitutive Model Considering Transformation Induced Plasticity for Shape Memory Alloys under Cyclic Loading”, 8th ECCOMAS Thematic Conference on Smart Structures and Materials, Madrid, Spain, June 5-8, 2017.
“A Finite Strain Constitutive Model for Martensitic Transformation in Shape Memory Alloys Based on Logarithmic Strain,” L., Xu, T., Baxevanis, D.C., Lagoudas, 25th AIAA/AHS Adaptive Structures Conference, Grapevine, TX, January 9-13, 2017.
HERNANDEZ, E.A.P., HARTL, D.J. AND LAGOUDAS, D.C., 2017, August. “Analysis and Design of an Active Self-Folding Antenna,” ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (pp. V05BT08A049-V05BT08A049). American Society of Mechanical Engineers.
PHILLIPS, F.R. AND LAGOUDAS, D.C., 2017, April. “Influence of stress concentrations on failure of shape memory alloy actuators,” In Behavior and Mechanics of Multifunctional Materials and Composites 2017 (Vol. 10165, p. 101650D). International Society for Optics and Photonics.
JOY, J.K., SOLOMOU, A., BAXEVANIS, T. AND LAGOUDAS, D.C., 2017, April. “Predicting the constitutive response of precipitation hardened NiTiHf”, Behavior and Mechanics of Multifunctional Materials and Composites 2017 (Vol. 10165, p. 101650F). International Society for Optics and Photonics.
WHEELER, R. W., & LAGOUDAS, D. C. (2017, April). “Recent developments on SMA actuators: predicting the actuation fatigue life for variable loading schemes.” In A Tribute Conference Honoring Daniel Inman (Vol. 10172, p. 101720E). International Society for Optics and Photonics.
HERNANDEZ, E. P., HARTL, D. J., & LAGOUDAS, D. C. (2017, April). Design and simulation of origami structures with smooth folds. In Proc. R. Soc. A (Vol. 473, No. 2200, p. 20160716). The Royal Society.
PERAZA HERNANDEZ, E. A., HARTL, D. J., AND LAGOUDAS, D. C., “Modeling and design of shape memory alloy-based origami structures with smooth folds,” Proceedings of the 25th AIAA/AHS Adaptive Structures Conference, in AIAA SciTech Forum, No. 2017-1875. Grapevine, TX, January 9 – 13,
XU, L., BAXEVANIS, T., & LAGOUDAS, D. (2017). A Finite Strain Constitutive Model for Martensitic Transformation in Shape Memory Alloys Based on Logarithmic Strain. In 25th AIAA/AHS Adaptive Structures Conference (p. 0731).
Phillips, F., Jape, S., Baxevanis, T., & Lagoudas, D. C. (2017). Effect of triaxiality on phase transformation in ni50. 8ti notched cylindrical bars. In 25th AIAA/AHS Adaptive Structures Conference (p. 1674).

2016

WHEELER, R.W., BENAFAN, O., GAO, X., CALKINS, F.T., GHANBARI, Z., HOMMER, G., LAGOUDAS, D., PETERSEN, A., PLESS, J.M., STEBNER, A.P. AND TURNER, T.L., 2016. Engineering Design Tools for Shape Memory Alloy Actuators: CASMART Collaborative Best Practices and Case Studies.
ILIOPOULOS, A. P., STEUBEN, J. C., MICHOPOULOS, J. G., BAXEVANIS, T., KIRK, T., & LAGOUDAS, D. C. (2016, August). On the Thermomechanical Behavior of Ni60Ti40 Coupons via High Performance Full Field Experiments. In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (pp. V01AT02A007-V01AT02A007). American Society of Mechanical Engineers.
JAPE, S., SOLOMOU, A., BAXEVANIS, T., & LAGOUDAS, D. C. (2016, April). Fracture toughness of shape memory alloy actuators: effect of transformation-induced plasticity. In Behavior and Mechanics of Multifunctional Materials and Composites 2016 (Vol. 9800, p. 98000C). International Society for Optics and Photonics.
WHEELER, R., OTTMERS, C., HEWLING, B., & LAGOUDAS, D. (2016, April). Actuator lifetime predictions for Ni 60 Ti 40 shape memory alloy plate actuators. In Behavior and Mechanics of Multifunctional Materials and Composites 2016 (Vol. 9800, p. 98000E). International Society for Optics and Photonics.
COX, A., BAXEVANIS, T., & LAGOUDAS, D. C. (2016). Constitutive Modeling of Near-Equiatomic NiTi Shape Memory Alloys Considering Composition and Heat Treatment. In Materials Science Forum (Vol. 856, pp. 78-84). Trans Tech Publications.
GARDEA, F., LAGOUDAS, D.C. AND NARAGHI, M., 2016. An Experimental Study into Active Damping Mechanisms in CNT Nanocomposite. In 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (p. 1418).
GARDEA, F., LAGOUDAS, D. AND NARAGHI, M., 2016, “Active Damping in Polymer-Based Nanocomposites”, Mechanics of Composite and Multi-functional Materials, Volume 7 (pp. 235-239). Springer, Cham.
PERAZA HERNANDEZ, E. A., HARTL, D. J., AND LAGOUDAS, D. C., “Modeling and Design of Active Origami Structures with Smooth Folds,” Proceedings of the 27th International Conference on Adaptive Structures and Technologies (ICAST), Lake George, NY, October 3 – 5, 2016.
PERAZA HERNANDEZ, E. A., HARTL, D. J., AND LAGOUDAS, D. C., “Design of Origami Structures with Smooth Folds,” Proceedings of the ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(Paper No. SMASIS2016-9195). Stowe, VT, September 28 – 30, 2016.

2015

JAPE, S., BAXEVANIS, T., LAGOUDAS, D.C., Stable crack growth during actuation in shape memory alloys, Proc. SPIE 9058, Behavior and Mechanics of Multifunctional Materials and Composites 2014, 905802 (March 10, 2014); doi:10.1117/12.2048590.
JAPE, S., PARRINELLO, A., BAXEVANIS, T., LAGOUDAS, D.C., On the Fracture Response of Shape Memory Alloy Actuators, Middle East – Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), The Minerals, Metals & Materials Society(TMS)(July 31, 2015); DOI:10.1002/9781119090427.
JAPE, S., SOLOMOU, A., BAXEVANIS, T., LAGOUDAS, D.C., Fracture toughness of shape memory alloy actuators: Effect of Transformation-Induced Plasticity, Proc. SPIE 9800, Behavior and Mechanics of Multifunctional Materials and Composites 2016, 98000C (April 21, 2016); doi:10.1117/12.2219495.
ROHMER, J. L., PERAZA HERNANDEZ, E. A., SKELTON, R. E., HARTL, D. J. AND LAGOUDAS, D. C., “An Experimental and Numerical Study of Shape Memory Alloy-Based Tensegrity/Origami Structures,” Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition(Paper No. IMECE2015-51928). Houston, TX, November 13 – 19, 2015.
PERAZA HERNANDEZ, E. A., HARTL, D. J., MALAK, R. J. AND LAGOUDAS, D. C., “Analysis and Optimization of a Shape Memory Alloy-Based Self-Folding Sheet Considering Material Uncertainties,” Proceedings of the ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(Paper No. SMASIS2015-9001). Colorado Springs, CO, September 21 – 23, 2015.
TRUONG, H., MARTINEZ, M., OCHOA, O. AND LAGOUDAS, D.C., “An Investigation on Hybrid Interface Using On-Line Monitoring Experiment and Finite Element Analyses,” Proceedings of the ICCM 20, July 19-24, 2015, Copenhagen, Denmark.

2014

WHEELER, R., SANTA-CRUZ, J., HARTL, D., CHEMISKY, Y. and LAGOUDAS, D.C., “Characterization and Modeling of Thermo-Mechanical Fatigue in Equiatomic NiTi Actuators,” Proceedings of the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. September 8-10, 2014, Newport, Rhode Island, USA.
GARDEA, F., NARAGHI, M. and LAGOUDAS, D.C., “The importance of interfacial resistance on the thermal behavior of carbon nanofiber/epoxy composites,” In the proceedings of the SPIE Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, International Society for Optics and Photonics Conference, San Diego, CA, March 10 – 15, 2014.
TABESH, M., BOYD, J.G. and LAGOUDAS, D.C., “Modeling size effect in the SMA response: a gradient theory,” In the proceedings of the SPIE Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, International Society for Optics and Photonics Conference, San Diego, CA, March 10 – 15, 2014.
PERAZA-HERNANDEZ, E. A., FREI, K. R., HARTL, D. J., & LAGOUDAS, D. C., “Folding patterns and shape optimization using SMA-based self-folding laminates,” In the proceedings of the SPIE Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, International Society for Optics and Photonics Conference, San Diego, CA, March 10 – 15, 2014.

2013

PERAZA HERNANDEZ, E. HARTL, D.J. and LAGOUDAS, D.C., “Modeling of Shape Memory Alloy Wire Meshes using Effective Lamina Properties for Improved Analysis Efficiency,” Proceedings of ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, UT, September 16-18, 2013.
BAXEVANIS, T., PARRINELLO, A. and LAGOUDAS, D.C., “On the Energy Release Rate During Global Thermo-Mechanically-Induced Phase Transformation in Shape Memory Alloys,” Proceedings of ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, UT, September 16-18, 2013.
WHEELER, R.W., SANTA-CRUZ, J. HARTL, D.J. and LAGOUDAS, D.C., “Effects of Processing and Loading on Equiatomic NiTi Fatigue Life and Localized Failure Mechanisms,” Proceedings of ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, UT, September 16-18, 2013.
COX, A., BAXEVANIS, T. and LAGOUDAS, D.C., “Numerical Evaluation of the Effect of Ni₄Ti₃ Precipitates on the Overall Thermo-Mechanical Response of NiTi Shape Memory Alloys,” Proceedings of ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, UT, September 16-18, 2013.
LESTER, B.T. and LAGOUDAS, D.C., “Modeling of the Effective Actuation Response of SMA-Max Phase Composites with Partially Transforming NiTi,” Proceedings of ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, UT, September 16-18, 2013.
CORNELL, S.R., HARTL, D.J. and LAGOUDAS, D.C., “Experimental Validation of a Shape Memory Alloy Constitutive Model by Heterogeneous Thermal Loading Using Infrared Thermography and Digital Image Correlation,” Proceedings of ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2013, Snowbird, UT, September 16-18, 2013.
PERAZA HERNANDEZ, E., HARTL, D.J. and LAGOUDAS, D.C., “Shape Memory Alloy Laminate for Design of Self-Folding Reconfigurable Structures,” 19^th International Conference on Composite Materials (ICCM), July 29- August 2, 2013, Montreal, Canada.
COX, A., BAXEVANIS, T. and LAGOUDAS, D.C., “Finite Element Analysis of the Precipitation Effects on the Transformation Behavior Characteristics of Ni-rich NiTi SMAs,” JAPMed’08, June 24-26, 2013, Athens, Greece.
LESTER, B. T. and LAGOUDAS, D.C., “Modeling of Multifunctional Shape Memory Alloy – MAX Phase Ceramic Composites,” JAPMed’08, June 24-26, 2013, Athens, Greece.
LAGOUDAS, D.C., “Perspectives on the Characterization and Modeling of Shape Memory Alloys for Smart Structures Applications, keynote, JAPMed’08, June 24-26, 2013, Athens, Greece.
SANTA CRUZ, J., HARTL, D. and LAGOUDAS, D.C., “In-Situ Strain Localization Measurements of Shape Memory Alloy Actuators during a Research Experiences for Undergraduates Program,” Proceedings of the 120^th ASEE Annual Conference, June 2013, Atlanta, GA.
LESTER, B. T., and LAGOUDAS, D. C., 2013, “Modeling of Residual Stresses in Shape Memory Alloy – Ceramic Composites”, Proceedings of the 54^th AIAA Conference on Structures, Structural Dynamics and Materials, April 8-11, 2013, Boston, MA, USA.
HARTL, D.J., PERAZA HERNANDEZ, E.A. and LAGOUDAS, D.C., “Finite Element Analysis of the Nonlinear Dynamics of a Shape Memory Alloy Structure,” Proceedings of the XV International Symposium on Dynamic Problems of Mechanics (DINAME 2013), Buzios, RJ. Brazil, February 17-22, 2013.

2012

TABESH, M., BOYD, J., LAGOUDS, D.C., ROHMER, J., ATLI, K., FRANCO, B., and KARAMAN, I., “Design of a Multiple-actuation Shape Memory Alloy Pipe Coupler: Material Development and Characterization”, Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE, November 9-15, 2012, Houston, TX.
CHAWLA, S., GARDEA, F., NARAGHI, M., and LAGOUDAS, D.C., “Carbon nanofibers as a means to Enhance Composites Fracture Toughness,” Proceedings of the American Society for Composites 27^th Annual Technical Conference/The 15^th US-Japan Conference on Composite Materials, October 1-3, 2012, Arlington, TX.
TABESH, M., LESTER, B., HARTL, D., AND LAGOUDAS, D., 2012, “Influence of the Latent Heat of Transformation and Thermomechanical Coupling on the Performance of Shape Memory Alloy Actuators”, Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 19-21, Stone Mountain, GA.
TABESH, M., ATLI, K.C., ROHMER, J., FRANCO, B.E., KARAMAN, I., BOYD, J.G., and LAGOUDAS, D.C., “Design of shape memory alloy pipe couplers: modeling and experiments”, Proceedings of SPIE 8343, Industrial and commercial applications of smart structures, March 2012, San Diego, CA, USA.
TABESH, M., LIU, B., BOYD, J., and LAGOUDAS, D.C., “Analytical Solution for Pseudoelastic Response of a Shape Memory Alloy Thick-walled Cylinder Under Internal Pressure”, Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS, 2012, Stone Mountain, GA.
LESTER, B. T., AND LAGOUDAS, D. C., 2012, “Modeling of Hybrid Shape Memory Alloy Composites Incorporating MAX Phase Ceramics”, Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 19-21, Stone Mountain, GA.
LESTER, B. T. and LAGOUDAS, D. C., 2012, “Computational Micromechanical Modeling of Ceramic-SMA Composites”, Proceedings of the 53rd AIAA Conference on Structures, Structural Dynamics and Materials, April 23-25, 2012, Honolulu, HI.
HARTL, D.J., SOLOMOU, A., LAGOUDAS, D.C. and SARAVANOS, D., “Phenomenological Modeling of Induced Transformation Anisotropy in Shape Memory Alloy Actuators,” In Proceedings of SPIE Smart Structures and Materials/NDE Conference, San Diego, March 2012, pp. 1–14.
OEHLER, S., HARTL, D.J., TURNER, T. and LAGOUDAS, D.C., “Modeling Fluid Structure Interaction with Shape Memory Alloy Actuated Morphing Aerostructures,” In Proceedings of SPIE Smart Structures and Materials/NDE Conference, San Diego, March 2012, pp. 1–11.

2011

CALHOUN, C., LAGOUDAS, D.C. and HARTL, D.J., “Effect of Ni₃Ti precipitate Orientation on Actuation Fatigue of Ni-Rich NiTi Shape memory Alloys,” In Proceedings of SMASIS 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Scottsdale, Arizona, September 2011, pp. 1–9.
OEHLER, S., HARTL, D.J., LAGOUDAS, D.C. and MALAK, R., “Design Optimization of a Shape Memory Alloy Actuated Morphing Aerostructure,” In Proceedings of SMASIS 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Scottsdale, Arizona, September 2011, pp. 1–9.
LESTER, B. T., CHEMISKY, Y., GELTMACHER, A. B., QIDWAI, S. M., EVERETT, R. K., and Lagoudas, D. C., “Virtual Processing of Hybrid Shape Memory Alloy Composites”, Proceedings of SMASIS 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Scottsdale, AZ, September 18-21, 2011.
SHRYOCK, K., DAS, K., OEHLER, S., RICHARD, J. AND LAGOUDAS, D.C., 2011, “Bringing Aerospace Application into a Project-Based First-Year Engineering Course, Proceedings of the American Society for Engineering Education, Vancouver, Canada, June 26-30, 2011.
CHARALAMBAKIS, N., CHATZIGEORGIOU, G., EFENDIEV, Y. and LAGOUDAS, D.C., “Effective behavior of composite structures made of thermoelastic constituents with cylindrical periodicity,” ICM11, June 5-9, 2011, Como, Italy.
CALHOUN, C. and LAGOUDAS, D.C., “Microstructural effects on actuation fatigue of Ni-rich Shape Memory Alloys”, 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, April 4-7, 2011, Denver, Colorado.
DAS, K., WHITCOMB, J. and LAGOUDAS, D.C., “Analysis and design of microstructure for a highly reflective thermal barrier coating of nano-porous aluminum oxide”, 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, April 4-7, 2011, Denver, Colorado.
KUMAR, P.K., CAER, C., PATOOR, E. and LAGOUDAS, D.C., “Influence of Stress and Temperature of the Retained Martensite Accumulation,” SPIE Smart Structures/Nondestructive Evaluation Conference, San Diego, CA, March 7-9, 2011.
KUMAR, P.K., KARAMAN, I., LAGOUDAS, D.C., NOEBE, R. and BIGELOW, G., “A Combined Phase Transformation-Deformation Mechanism Map for Ti₅Pd₃₀Ni_19.5 High Temperature Shape memory Alloy,” SPIE Smart Structures/Nondestructive Evaluation Conference, San Diego, CA, March 7-9, 2011.
LESTER, B.T., CHEMISKY, Y., GELTMACHER, A., QIDWAI, S.M. and LAGOUDAS, D.C., “Virtual Processing of Hybrid SMA Composites Through Martensitic Transformation,” SPIE Smart Structures/Nondestructive Evaluation Conference, San Diego, CA, March 7-9, 2011.
OEHLER, S., HARTL, D. and LAGOUDAS, D.C., “Analysis and Optimization of Improved Hybrid SMA Flexures for High Rate Actuation,” SPIE Smart Structures/Nondestructive Evaluation Conference, San Diego, CA, March 7-9, 2011.
HALDAR, K. and LAGOUDAS, D.C., “Model Predictions of Strain and Magnetization under Magneto-Thermo-Mechanical Loading Paths in MSMAs,” SPIE Smart Structures/Nondestructive Evaluation Conference, San Diego, CA, March 7-9, 2011.
VOLK, B.L., LAGOUDAS, D.C. and MAITLAND, D.J., “Constrained Displacement Recovery of a Polyurethane Shape Memory Polymer,” SPIE Smart Structures/Nondestructive Evaluation Conference, San Diego, CA, March 7-9, 2011.
SANTAMARTA, R., PONS, J., PICORNELL, C., CESARI, E., FONT, J., MUNTASELL, J., KARAMAN, I., and LAGOUDAS, D.C., “Transformation Characteristics of Ni-Mn-Ga High Temperature Shape Memory Alloys,” Symposium on Physical and Mechanical Metallurgy of Shape Memory Alloys for Actuator Applications, TMS 2011, 140^th Annual Meeting and Exhibition, San Diego, CA, February 27 – March 3, 2011, 2011.

2010

AWASTHI, A.P. and LAGOUDAS, D.C., “Mechanical Interfacial Behavior in Nanocomposites with Bond-Breaking Effects”, ASME 2010 International Mechanical Engineering Congress & Exposition, British Columbia, Vancouver, Canada, November 2010.
HALDAR, K., LAGOUDAS, D.C., BASARAN, B. and KARAMAN, I., “Constitutive Modeling of Magneto-thermo-Mechanical Response of Field-Induced Phase Transformations in NiMnColn Magnetic Shape Memory Alloys,” Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, September 28 – October 1, 2010, Philadelphia, PA.
CHEMISKY, Y., LAGOUDAS, D.C., PIOTROWSKI, B., PATOOR, E. and BEN-ZINEB, T., “Modeling of Precipitation Effects on the Thermomechanical Behavior of NiTi SMA,” Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, September 28 – October 1, 2010, Philadelphia, PA.
LESTER, B., CHEMISKY, Y. and LAGOUDAS, D.C., “Numerical Prediction of Effective Transformation Properties of Hybrid SMA-Ceramic Composites,” Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, September 28 – October 1, 2010, Philadelphia, PA.
VOLK, B.L., LAGOUDAS, D.C. and MAITLAND, D.J., “Characterizing and Modeling the Free Recovery and Constrained Recovery Behavior of a Polyurethane Shape Memory Polymer,” Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, September 28 – October 1, 2010, Philadelphia, PA.
CHATZIGEORGIOU, G., CHEMISKY, Y. and LAGOUDAS, D.C., “Modeling of Cyclic Response of high Temperature Shape Memory Alloys Undergoing Viscoplastic Mechanisms,” Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2010, September 28 – October 1, 2010, Philadelphia, PA.
DAS, K., WHITCOMB, J. and LAGOUDAS, D.C., “Electromagnetic Radiation Through a Tio2 Nanotube Membrane Used as a Thermal Barrier Coating,” Proceedings of USNCTAM2010, 16th US National Congress of Theoretical and Applied Mechanics, June 27 – July 2, 2010, State College, PA.
KUMAR, P.K., DESAI, U., CHATZIGEORGIOU, G., LAGOUDAS, D.C., MONROE, J., KARAMAN, I., NOEBE, R. and BIGELOW, G., “Experiment and Modeling of Simultaneous Creep, Plasticity and Transformation of High Temperature Shape Memory Alloys During Cyclic Actuation,” Proceedings of the 51^st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and materials Conference, April 12-15, 2010, Orlando, FL, AIAA 2010-2992.
NOLAN, J., HARTL, D.J. and LAGOUDAS, D.C., “3-D Finite Element Analysis of Indentation Recovery due to the Shape Memory Effect,” SPIE Smart Structures and Materials/NDE Conference, San Diego, March 2010, pp. 1{10.
KUMAR, P.K., DESAI, U., MONROE, J.A., LAGOUDAS, D.C., KARAMAN, I., NOEBE, R.D., and BIGELOW, G., “Phase Transformation and Creep Behavior in Ti₅₀Pd₃₀Ni₂₀ High Temperature Shape Memory Alloy in Compression,” Proceedings of the SPIE, Behavior and Mechanics of Multifunctional Materials and Composites 2010, Vol. 7644, pp. 76440Q, 2010.
CHATZIGEORGIOU, G., HALDAR, K. and LAGOUDAS, D.C., “Stability of the Magnetomechanical Problem in Magnetic Shape Memory Alloys,” Behavior and Mechanics of Multifunctional Materials and Composites 2010, edited by Zoubeida Ounaies and Jiangyu, Proceedings of SPIE, Vol. 7644, 76440Y.

2009

Engineering Congress & Exposition, Lake Buena Vista, Florida, November 2009.
Composite Structures Reinforced with Carbon Nanotubes”, ASME 2009 International Mechanical
CHATZIGEORGIOU, G. AND LAGOUDAS, D.C., “Micromechanic Methods for Carbon Fiber
LAGOUDAS, D.C. and CHATZIGEORGIOU, G., “Asymptotic Expansion Homogenization Method for Carbon Fiber Composite Structures Reinforced with Carbon Nanotubes,” Proceedings of IMECE 2009, ASME 2009 International Mechanical Engineering Congress and Exposition, November 13-19, 2009, Florida, IMECE 2009-13158.
LAGOUDAS, D.C., CHATZIGEORGIOU, G., HARTL, D.J and KUMAR, P.K., “Coexistence of Creep and Transformation in High Temperature Shape Memory Alloys,” Proceedings of IMECE 2009, ASME 2009 International Mechanical Engineering Congress and Exposition, November 13-19, 2009, Florida, IMECE 2009-11718.
HARTL, D.J., CHATZIGEORGIOU, G. and LAGOUDAS, D.C., “Three-dimensional modeling of rate – dependent deformation in Shape Memory Alloys at High Temperatures,” Proceedings of the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 21-23, 2009, Oxnard, CA, SMASIS 2009-1468.
PHILLIPS, F.R., ZHENG, H. and LAGOUDAS, D.C., “Size Effect on the Phase Transformation of In-21at%Ti Nanowires,” Vol. 1: Active materials, Mechanics and Behavior; Modeling, Simulation and Control, ISBN: 978-0-7918-4896-8, SMASIS, September 21-23, 2009, Oxnard, CA.
THAKRE, P.R. and LAGOUDAS, D.C., “Multifunctional multi-scale carbon-fiber/epoxy matrix composites reinforced with carbon nanotubes”, Proceedings of the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, September 21-23, 2009, Oxnard, CA.
HARTL, D.J., OEHLER, S. and Lagoudas, D.C., “Constitutive Modeling of Phase Transformation and Plastic Yield in SMAs: Application to the S3T-RoundRobin,” ESOMAT 2009 Conference, Prague, Czech Republic, September 2009, pp. 1-7.
HARTL, D.J. and LAGOUDAS, D.C., “Modeling of Stress Concentrations in SMA Components Considering Plastic and Viscoplastic Yielding,” 50^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and materials Conference, Palm Springs, CA, May 4-7, 2009.
BERTACCHINI, O.W., SCHICK, J. and LAGOUDAS, D.C., “Transformation induced cyclic behavior and fatigue properties of Ni-rich NiTi SMA actuators.” Proceedings of the SPIE (San Diego, CA., March 2009), Behavior and Mechanics of Multifunctional Materials and composites, Vol. 7289, Zoubeida Qunaies, Jiangyu Li, Editors, 2009, 72890P – 72890P-12.
LAGOUDAS, D.C., KIEFER, B. and HALDAR, K., “Magnetic field-induced reversible phase transformation in magnetic shape memory alloys,” Vol. 7289, 72891O, 2009 SPIE San Diego, CA, March 8-12, 2009.
BERTACCHINI, O.W., SCHICK, J. and LAGOUDAS, D.C., “Parametric Study and Characterization of the Isobaric Thermomechanical Transformation Fatigue of Nickel-Rich NiTi SMA Actuators,” Vol. 7289, 72890P, 2009 SPIE San Diego, CA, March 8-12, 2009.
HARTL D.J. and LAGOUDAS, D.C., “Experimental Investigation and 3-D Modeling of Rate-Dependent Irrecoverable Deformation in Shape Memory Alloys,” Vol. 7289, 72890L, 2009 SPIE San Diego, CA, March 8-12, 2009 (Best Student Paper Award).
CHATZIGEORGIOU, G.E. and LAGOUDAS, D.C., “A Constitutive Model for High Temperature SMA’s Exhibiting Viscoplastic Behavior,” Vol. 7289, 72890U, 2009 SPIE San Diego, CA, March 8-12, 2009.
KUMAR, P.K. and LAGOUDAS, D.C., ” Creep Behavior in TiPdNi High Temperature Shape Memory Alloy, Proceedings of SPIE Vol. 7289, Behavior and Mechanics of Multifunctional Materials and Composites, San Diego, CA, March 8-12, 2009.

2008

HARTL, D., MOONEY, J. and LAGOUDAS, D., “Numerically Implemented Constitute Model for SMA Applications Experiencing General Loads Resulting in Plastic Deformation and Large Rotations,” ASME Smart Materials, Adaptive Structures and Intelligent Symposium, SMASIS08-489, Elliott City, MD, October 28-30, 2008.
LAGOUDAS, D.C., KIEFER, B., and HALDAR, K., “Magneto-Mechanical Finite Element Analysis of Magnetic Shape Memory Alloys with body Force and Body Couple,” ASME Smart Materials, Adaptive Structures and Intelligent Symposium, SMASIS08-533, Elliott City, MD, October 28-30, 2008.
VOLK, B.L. and LAGOUDAS, D.C., “Thermomechanical Characterization of Shape Memory Polymers,” 19^th International Conference on Adaptive Structures and Technologies, Paper ID 66, Ascona, Switzerland, October 6-9, 2008.
HARTL, D.J. and LAGOUDAS, D.C., “Analysis of Simultaneous Transformation and Plastic Deformation in Shape Memory Alloys,” 19^th International Conference on Adaptive Structures and Technologies, Ascona, Switzerland, October 6-9, 2008.
BERTACCHINI, O. W., LAGOUDAS, D. C., CALKINS, F. T. MABE, J. H., “Transformation induced cyclic behavior and fatigue properties of Ni-rich NiTi SMA actuators.” Proceedings of the ICOMAT ’08, Santa Fe, New Mexico, July 2008.
SEIDEL, G.D., and LAGOUDAS, D.C., “Micromechanics Modeling of Polymer Nanocomposites for use as Multifunctional Materials,” AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Schaumburg, IL, April 7-10, 2008.
SAGER, R.J., KLEIN, P.J., LAGOUDAS, D.C., WARREN, G.L. and SUE, H.J., “Fracture Toughness of Woven Carbon Fiber/Epoxy Laminates with Carbon Nanotube/Epoxy Thin Films,” AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Schaumburg, IL, April 7-10, 2008.
PADULA, S.A., GAYDOSH, D.J., NOEBE, R.D., BIGELOW, G.S., GARG, A., LAGOUDAS, D.C., KARAMAN, I., and ATLI, K.C., “Influence of Test Procedures on the Thermomechanical Properties of a 55NiTi Shape Memory Alloy,” 6929-38, 2008 SPIE San Diego, CA, March 9-13, 2008.
VOLK, B.L., LAGOUDAS, D.C. and CHEN, Y.-C., “Thermomechanical Characterization of the Nonlinear, Rate Dependent Response of Shape Memory Polymers,” Vol. 6928-31, 2008 SPIE San Diego, CA, March 9-13, 2008.
HARTL, D.J. and LAGOUDAS, D.C., “Simultaneous Transformation and Plastic Deformation in Shape Memory Alloys, 2008 SPIE, Vol. 6929-49, 2008 SPIE San Diego, CA, March 9-13, 2008.
BERTACCHINI, O.W., LAGOUDAS, D.C., CALKINS, F.T., and MABE, J.H., “Thermomechanical cyclic loading and fatigue life characterization of nickel rich NiTi shape-memory alloy actuators,” Vol. 6929-42, 2008 SPIE San Diego, CA, March 9-13, 2008.
HARTL, D.J., MOONEY, J.T., and LAGOUDAS, D.C., “Experimentally Validated Numerical Analysis of Aerostructures Incorporating Shape Memory Alloys,”, Vol. 6929-39, 2008 SPIE San Diego, CA, March 9-13, 2008.

2007

K. Kumar and D. C. Lagoudas, Thermomechanical Characterization of a TiPdNi High Temperature SMA under Tension, Proceedings of SPIE Vol.6526, Behavior and Mechanics of Multifunctional and Composite Materials, 2007.
SEIDEL, G.D., BISRAT, Y., and LAGOUDAS, D.C., “Electrical and Thermal Conductivities of Carbon Nanotube-Epoxy Composites: Modeling and Characterization,” IMECE2007-42339, ASME 2007, Seattle, WA, Nov. 11-15, 2007.
HADJIEV, V.G., LAGOUDAS, D.C., and STRONG, K., “Spectroscopic Imaging of Polymer Nanocomposites containing Carbon Fillers,” SAMPE Fall Technical Conference and Exhibition, Cincinnati, OH, October 29-November 1, 2007.
LAGOUDAS, D.C., BARRERA, E.V., SAYER, B., AYEWAY, D., and ROJAS, G., “Interlaminar Shear Toughness of a Nanocomposite,” 16^th International Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007.
VOLK, B. and LAGOUDAS, D.C., “Characterization and Modeling of Nonlinear Rate Dependent Response of Shape Memory Polymers”, COMP2007-052, Comp-07 (International Symposium on Advanced Composite Technology), Corfu, Greece, May 16-18, 2007.
SEIDEL, G.D. and LAGOUDAS, D.C., “Micromechanical Analysis of Interphase Effects on Multi-functional Nature of Carbon Nanotube Composites”, MCMAT2007-30503, McMat 2007 (ASME Applied Mechanics and Materials Conference), Austin, TX, June 3-7, 2007.
KUMAR, P.K. and LAGOUDAS, D.C., “Transformation Behavior in TiPdNi High Temperature Shape Memory Alloys”, MCMAT2007-30340, McMat 2007 (ASME Applied Mechanics and Materials Conference), Austin, TX, June 3-7, 2007.
LAGOUDAS, D.C. and SEIDEL, G.D., “Micromechanics Modeling of the Multi-Functional Nature of Carbon Nanotube-Epoxy Nanocomposites: Effective Elastic Thermal and Electrical Properties”, Proceedings Paper for COMP07: 6th International Symposium on Advanced Composites, Corfu, Greece, 16-18 May, 2007. (COMP2007-021)
LAGOUDAS, D., KIEFER, B. and BROEDERDORF, A., “Constitutive Modeling of Magnetic Shape Memory Alloys with Magneto-Mechanical Coupling,” COMP2007-033, Comp-07 (International Symposium on Advanced Composite Technology), Corfu, Greece, May 16-18, 2007.
SEIDEL, G.D. and LAGOUDAS, D.C., “Micromechanics Aspects of Multi-scale Modeling of Multi-functional Nanocomposites”, AIAA-2007-2172, AIAA-SDM, Honolulu, HI, April 23-26, 2007.
HARTL, D. and LAGOUDAS, D.C., “Characterization and 3-D Modeling of Ni60Ti SMA for Actuation of a Variable Geometry Jet Engine Chevron”, Vol. 6529, SPIE 2007, San Diego, CA, March 18-22, 2007.
MACHADO, L.G. and LAGOUDAS, D.C., “Nonlinear Dynamics and Chaos of a SMA Passive Vibration Isolation and Damping Device”, Vol. 6525, SPIE 2007, San Diego, CA, March 18-22, 2007.
KUMAR, P.K. and LAGOUDAS, D.C., “Thermomechanical Characterization of TiPdNi High Temperature SMAs”, Vol. 6526, SPIE 2007, San Diego, CA, March 18-22, 2007.

2006

K. Kumar, D. C. Lagoudas, K. Zanca and M. Z. Lagoudas, Thermomechanical Characterization of High Temperature SMA Actuators, Proceedings of SPIE Vol.6170, Smart Structures and Materials, 2006.
AYEWAH, D., DAVIS, D., LAGOUDAS, D.C., and KRISHNAMOORTI, R., “Strength and Fracture of a Multifunctional Polystyrene Nanocomposite”, IMECE2006-13053, ASME 2006, Chicago, IL, November 5-10, 2006.
BISRAT, Y., CHEN, C.C., LUO, Z.P., CHAO, C.G., DAVIS, D. and LAGOUDAS, D.C., “Fabrication of Bi Nanowires Using a Vacuum Melting and Mechanical Injection Technique”, IMECE2006-15974, ASME 2006, Chicago, IL, November 5-10, 2006.
LAGOUDAS, D.C., HARTL, D., VOLK, B., CALKINS, F. and MABE, J., “Thermomechanical Characterization of Ni60Ti40 SMA for Actuated Chevrons”, IMECE2006-15029, ASME 2006, Chicago, IL, November 5-10, 2006.
LAGOUDAS, D.C., KIEFER, B., and BRODERDORF, A.J., “Accurate Interpretation of Magnetic Shape Memory Alloy Experiments Utilizing Coupled Magnetostatic Analysis”, IMECE2006-15296, ASME 2006, Chicago, IL, November 5-10, 2006.
LAGOUDAS, D.C., BERTACCHINI, O.W., and PATOOR, E., “Surface Crack Development in Transformation Induced Fatigue of SMA Actuators,” 16^th European Conference of Fracture (ECF16), Alexandroupolis, Greece, July 3-7, 2006.
AWASTHI, A.P., LAGOUDAS, D.C., and HAMMERAND, D.C., “Modeling of Interface Behavior in Carbon Nanotube Composites,” AIAA-1677-515, 47^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, RI, May 1-4, 2006.
OH, B.T, KAWATSUJI, Y., KINRA, V.K., and LAGOUDAS, D.C., “Effect of thermal shock on damage in cryogenic composite laminates,” AIAA- 2016-232 47^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, RI, May 1-4, 2006.
THAKRE, P.R., LAGOUDAS, D.C., ZHU, J., BARRERA, E.V., and GATES, T.S., “Processing and Characterization of Epoxy/SWCNT/Woven Fabric Composites,” AIAA-1857-339, 47^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, RI, May 1-4, 2006.
AWASTHI, A.P., LAGOUDAS, D.C., and HAMMERAND, D.C., “Modeling of Interface Behavior in Carbon Nanotube Composites,” AIAA-1677-515, 47^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, RI, May 1-4, 2006.
SEIDEL, G.D., LAGOUDAS, D.C., FRANKLAND, S.J.V. and GATES, T.S., “Micromechanics Modeling of Functionally Graded Interphase Regions in Carbon Nanotube-Polymer Composites,” AIAA-1678-460, 47^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, RI, May 1-4, 2006.
KIEFER, B. and LAGOUDAS, D.C., “Modeling of the Hysteretic Magnetic Field-Induced Strain and Magnetization Response in Magnetic Shape Memory Alloys,” AIAA-1766-438, 47^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, RI, May 1-4, 2006.
RIDDICK, J.C., FRANKLAND, S.-J.V., RATCLIFFE, J.G., GATES, T.S., LAGOUDAS, D.C., ZHU, J. and BARRERA, E.V., “Multiscale Analysis of Delamination of Carbon Fiber Textile Composites with Carbon Nanotubes,” AIAA-1676-505, 47^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, RI, May 1-4, 2006.
KIEFER, B. and LAGOUDAS, D.C., “Application of a MSMA constitutive model in the analysis of magnetomechanical boundary value problems,” Proceedings of SPIE Vol. 6170, SPIE, San Diego, CA, February 28-March 2, 2006.
LAGOUDAS, D.C. and KUMAR, P.K., “Thermomechanical characterization of high-temperatures SMA Actuators, Proceedings of SPIE Vol. 6170, SPIE, San Diego, CA, February 28-March 2, 2006.
MACHADO, L.G. and LAGOUDAS, D.C., “Nonlinear dynamics of a SMA passive vibration isolation device,” Proceedings of SPIE Vol. 6169, SPIE, San Diego, CA, February 28-March 2, 2006.

2005

LAGOUDAS, D.C., “Modeling of Multifunctional Materials with Shape Memory, ICCES0520050717439, International Conference on Computational & Experimental Engineering and Sciences (ICCES), Chennai, India, December 1-6, 2005.
AWASTHI, A.P., OH, E.-S., LAGOUDAS, D.C., “On the Evaluation of Stiffness for Carbon Nanotubes,” ICCES0520050717428, International Conference on Computational & Experimental Engineering and Sciences (ICCES), Chennai, India, December 1-6, 2005.
THAKRE, P.R., ZHU, J., BARRERA, E.V., GATES, T.S., LAGOUDAS, D.C., “Effect of Functionalization and Weight Fraction of Single Walled Carbon Nanotubes on Mechanical Properties of Epoxy Nanocomposites,” ICCES0520050717439, International Conference on Computational & Experimental Engineering and Sciences (ICCES), Chennai, India, December 1-6, 2005.
C. LAGOUDAS, B. KIEFER, I. KARAMAN, “Constitutive modeling of the strain and magnetization hysteresis curves associated with the magnetic shape memory alloys,” ETH – IAP Workshop on Magnetic Shape Memory Alloys, Ascona, Switzerland, September 10-16, 2005.
SEIDEL, G.D., LAGOUDAS, D.C., FRANKLAND, S.J.V., and GATES, T.S., “Modeling functionally graded interphase regions in carbon nanotubes reinforced composites,” 20^th Annual Technical Conference, American Society for Composites, Philadelphia, PA, September 7-9, 2005.
Bertacchini, O. W., Lagoudas, D. C., and Patoor, E., “Thermomechanical Transformation Induced Fatigue of SMAs,” Proceedings of McMat2005-496, Mechanics and Materials Conference, Baton Rouge, LA, June 1-3, 2005.
SEIDEL, G.D., LAGOUDAS, D.C., and HAMMERAND, D.C., “Micromechanical analysis of clustering and load transfer in carbon nanotube composites,” Proceedings of McMat2005-495, Mechanics and Materials Conference, Baton Rouge, LA, June 1-3, 2005.
THAKRE, P.R., LAGOUDAS, D.C., BARRERA, E.V. and GATES, T.S., “Nano, Micro and Macro Characterization of Single Walled Carbon Nanotubes Reinforced Epoxy,” Proceedings of McMat2005-498, Mechanics and Materials Conference, Baton Rouge, LA, June 1-3, 2005.
AWASTHI, A.P., OH, E.-S., and LAGOUDAS, D.C., “Determination of average elastic modulus of single walled carbon nanotubes through vibrational model analysis using quantum mechanical calculations,” Proceedings of McMat2005-493, Mechanics and Materials Conference, Baton Rouge, LA, June 1-3, 2005.
LAGOUDAS, D., MACHADO, L., and LAGOUDAS, M., “Nonlinear Vibration of a One-Degree of Freedom Shape Memory Alloy Oscillator: A numerical-experimental investigation,” AIAA-2005-2119, 46^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Austin, TX, April 18-22, 2005.
PEDDIRAJU, P., GRENOBLE, R., FRIED, K. GATES, T. and LAGOUDAS, D., “Analytical Predictions and Experimental Measurements of Hydrogen Permeability in a Microcrack Damaged Composite,” AIAA-2005-2087, 46^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Austin, TX, April 18-22, 2005.
KIEFER, B., D. LAGOUDAS, “Modeling of the magnetic field-induced Martensitic variant reorientation in and the associated magnetic shape-memory effect in MSMAs,” Vol. 5761, SPIE Conference, San Diego, CA, March 6-10, 2005.

2004

Lagoudas, D., Popov, P., and Iliev, , “Constitutive Modelling of Shape Memory Alloys and Effective Properties of Fluid Saturated Porous Shape Memory Alloys, SES Conference, Lincoln, NE, Oct. 10-12, 2004.
Lagoudas, D., Karaman, I. and Kiefer, B., “Investigation of the Influence of the Magnetic Microstructure on the Martensitic Variant Reorientation Process in Magnetic Shape Memory Alloys,” SES Conference, Lincoln, NE, Oct. 10-12, 2004.
Lagoudas, D., Sediel, and Hammerand, D,. “Micromechanics of load transfer in carbon nanotube composites,” SES Conference, Lincoln, NE, Oct. 10-12, 2004.
FROYD, J., CASO, R. and LAGOUDAS, D., “Concept Inventories for Shape Memory Alloys and Piezoelectric Materials,” ASEE Annual Conference & Exposition, Salt Lake City, UT, June 20-23, 2004.
LAGOUDAS, D., PEDDIRAJU, P. NOH, J. AND WHITCOMB, J. “Numerical Modeling of Cryogen Leakage Through Composite Laminates,” AIAA Paper 2004-1862, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, April 19-22, 2004.
Lagoudas, D. and SEIDEL, G., “Effective Elastic Properties of Carbon Nanotubes and Carbon Nanotube Reinforced Composites,” AIAA Paper 2004-1782, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, April 19-22, 2004.
Lagoudas, D. and Kiefer, , “Phenomenological modeling and experimental characterization of ferromagnetic shape memory alloys,” SPIE Vol. 5387, 164-176, San Diego, CA, March 15-18, 2004.

2003

KUMAR , P.K., LAGOUDAS, D.C. and ENTCHEV, P. B., Thermomechanical Characterization SMA Actuators under Cyclic Loading, Proceedings of IMECE-03, ASME, 2003.
LAGOUDAS, D.C., REDINIOTIS, O.K., JUN, H.Y. and KHAN, M.M., “Development of a Fuel Powered SMA Actuator and a Thermoelectric SMA actuator system,” ASME Winter Conference, Washington, D.C., Nov. 16-22, 2003.
LAGOUDAS, D.C., P. ENTCHEV, P. KUMAR, “Thermomechanical Characterization of Large Diameter SMA Actuators under Cyclic Loading,” IMECE2003-42933, ASME Winter Conference, Washington, D.C., Nov. 16-22, 2003.
LAGOUDAS, D. C., I. KARAMAN, B. KIEFER, P. ENTCHEV, “A Phenomenological Model for Magnetic Shape Memory Alloys with Hysteresis Effects,” ASME Winter Conference, Washington, D.C., Nov. 16-22, 2003.
LAGOUDAS, D. C., J. WHITCOMB, P. PEDDIRAJU, P. POPOV, “Characterization of Effective Permeability of Cryogenic Composite Laminates,” IMECE2003-42908, ASME Winter Conference, Washington, D.C., Nov. 16-22, 2003.
LAGOUDAS, D. C., G. D. SEIDEL, 2003, “A Micromechanical Study on the Clustering Effect of Carbon Nanotube Reinforced Composites,” ASME Winter Conference, Washington, D.C., Nov. 16-22, 2003.
OH, B. T., J. NOH, D. C. LAGOUDAS, and J. D. WHITCOMB, “Effect of Thermal Shock on Damage in Cryogenic Composite Laminates”, Proceedings of the American Society for Composites 18^th Technical Conference, October, 2003.
GANPATYE, A. S., B. T. OH, K. MASLOV, V. K. KINRA and D. C. Lagoudas, “Mechanical Characterization and Ultrasonic NDE of Cryogenic Composites”, AIAA-2003-1433, 44^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, VA, April 7-10, 2003.
REDINIOTIS, O.K. and LAGOUDAS, D.C., “A Fishy Way to Build Submarines”, ASEE Prism, March 12, 2003.
LAGOUDAS, D. C., O. GODARD, M. LAGOUDAS, L. PENROD, “Design of space systems using SMAs,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5056, San Diego, CA, March 2-6, 2003.
LAGOUDAS, D. C., P. POPOV, “Numerical studies of wave propagation in polycrystalline shape memory alloy rods,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5053, 294-304, San Diego, CA, March 2-6, 2003.
BERTACCHINI, O., D. C. LAGOUDAS, E. PATOOR, “Fatigue life characterization of shape memory alloys undergoing thermomechanical cyclic loading,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5053, 612 – 624, San Diego, CA, March 2-6, 2003.
JUN, H., R. ALLEN, D. C. LAGOUDAS, O. REDINIOTIS, “Development of the fuel-powered compact SMA actuator: second generation actuator,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5054, San Diego, CA, March 2-6, 2003.
LEE, J., J. BOYD, , D. C. LAGOUDAS, C. SEO, “Effective Properties of Three-Phase Electro-Magneto-Elastic Multifunctional Composite Materials,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5053, 70 – 80, San Diego, CA, March 2-6, 2003.
MANI, R., D. C. LAGOUDAS, O. REDINIOTIS, M. M. KHAN, “MEMS based active skin for turbulent drag reduction,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5056, San Diego, CA, March 2-6, 2003.
LAGOUDAS, D. C., S. GIRIMAJI, R. PACHALLA, “Oscillatory forced cooled compact SMA actuator,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5055, San Diego, CA, March 2-6, 2003.
BOYD, J., D. C. LAGOUDAS, C. SEO, “Arrays of micro-electrodes and electromagnets for processing of electro-magneto-elastic multifunctional composite materials,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5053, 70-80, San Diego, CA, March 2-6, 2003.
LAGOUDAS, D. C., M. M. KHAN, O. K. REDINIOTIS, “Design of a compact thermoelectric SMA actuator: preliminary prototype design and testing,” 10^th Annual International Symposium on Smart Structures and Materials, SPIE Vol. 5054, San Diego, CA, March 2-6, 2003.

2002

REDINIOTIS, O.K. and LAGOUDAS, D.C., “Flexible Sub Swims Like the Fishes,” Popular Science, October 2002.
KINRA, V.K., LAGOUDAS D.C., WHITCOMB, J. D., “Characterization of Damage in Laminated Composites for Cryogenic Applications,” ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002.
LAGOUDAS, D.C., “Transformation-Induced Plasticity in SMAs During Cyclic Loading and its Effect on the Behavior of Porous SMAs,” ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002.
LAGOUDAS, D.C., O.K. REDINIOTIS, J.D. WHITCOMB, J.L. VALASEK, T. W. STRAGNAC, “The Implementation of an Undergraduate Curriculum with Focus on Intelligent Systems,” ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002.
LAGOUDAS, D.C., “Parametric Study and Experimental Correlation of an SMA Based Damping and Passive Vibration Isolation Device,” ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002.
LAGOUDAS, D.C., KHAN, M.M., MAYES, J.J., HENDERSON, B.K., “Parametric Study and Experimental Correlation of an SMA Based Damping and Passive Vibration Isolation Device,” New Orleans, LA, November 17-22, 2002.
PENROD, L., TALLEY, D., FROYD, J., CASO, R., LAGOUDAS, D., KOHUTEK, T., Integrating “Smart” Materials into a First-year Engineering Curriculum: A Case Study. Proceedings of the 2002 Frontiers in Education Conference, Boston, MA, November 6-9, 2002.
NOH, J., J. WHITCOMB, B. OH, D. LAGOUDAS, K. MASLOV, A. GANPATYE, and V. KINRA. “Numerical Modeling, Thermomechanical Testing, and NDE Procedures for Prediction of Microcracking Induced Permeability of Cryogenic Composites” Fifth Conference on Aerospace Materials, Processing, and Environmental Technology (AMPET), Huntsville, September, 2002.
ENTCHEV, P.B., LAGOUDAS, D.C., “Effect of Transformation-Induced Plastic Strains on the Mechanical Behavior of Porous NiTi SMA,” 14^thS. National Congress on Theoretical and Applied Mechanics, Vol. 1, p. 426, Blacksburg, VA, June 23-28, 2002.
LAGOUDAS, D.C., ENTCHEV, P.B., VANDYGRIFF, E.L., “Porous NiTi Fabricated using Powder Metallurgy Techniques: Characterization and Modeling,” 14^thS. National Congress on Theoretical and Applied Mechanics, Vol. 1, 424-5, Blacksburg, VA, June 23-28, 2002.
LAGOUDAS, D.C., POPOV, P., RAVI-CHANDAR, K., “Dynamic Loading of Polycrystalline Shape Memory Alloy Rods,” 14^thS. National Congress on Theoretical and Applied Mechanics, Vol. 1, p. 296, Blacksburg, VA, June 23-28, 2002.
LAGOUDAS, D.C., ENTCHEV, P.E., and VANDYGRIFF, E.L., “The Effect of Transformation-Induced Plastic Strains on the Behavior of Porous SMAs,” NATO Conference, Metz, France, April 20-27, 2002.
KHAN, M.M. and LAGOUDAS, D.C., “Modeling of Shape Memory Alloy pseudoelastic spring elements using Preisach model for passive vibration isolation,” 9^th Annual International Symposium on Smart Structures and Materials, SPIE, Vol. 4693, 336-347, San Diego, CA, March 18-21, 2002.
LAGOUDAS, D.C., ENTCHEV, P.B., VANDYGRIFF, E.L., “The Effect of Transformation Induced Plasticity on the Mechanical of Porous SMAs,” 9^th Annual International Symposium on Smart Structures and Materials, SPIE, Vol. 4699, 224-234, San Diego, CA, March 18-21, 2002.
STRELEC, J.K. and LAGOUDAS, D.C., “Fabrication and Testing of a Shape Memory Alloy Actuated Reconfigurable Wing,” 9^th Annual International Symposium on Smart Structures and Materials, SPIE, Vol. 4701, 267-280, San Diego, CA, March 18-21, 2002.
REDINIOTIS, O.K., LAGOUDAS, D.C., JUN, H.Y., R.D. ALLEN, R.D., “Fuel-Powered Compact SMA Actuator,” 9^th Annual International Symposium on Smart Structures and Materials, SPIE, Vol. 4700, 122-134, San Diego, CA, March 18-21, 2002.
REDINIOTIS, O.K., LAGOUDAS, D.C., MANI, R., “Active Skin for Turbulent Drag Reduction,” 9^th Annual International Symposium on Smart Structures and Materials, SPIE, Vol. 4699, San Diego, CA, March 18-21, 2002.

2001

LAGOUDAS, D.C. and MAYES, J.J., “Suitability of Shape Memory Alloys for Vibration Isolation,” Proceedings of the 2001 ASME International Mechanical Engineering Congress & Exposition, Active Vibration Isolation and Control II, New York, NY, Nov. 11-16, 2001.
LAGOUDAS, D.C., CHEN, Y.C., RAVI-CHANDAR, K., and DEGIORGI, V.G., “Dynamic Behavior of Porous Shape Memory Alloys,” Proceedings of the 2001 ASME International Mechanical Engineering Congress & Exposition, Mechanics of Cellular and Porous Materials III, New York, NY, Nov. 11-16, 2001.
LAGOUDAS, D.C., KHAN, M.M., MAYES, JOHN J., “Modelling of Shape Memory Alloys Springs for Passive Vibration Isolation,” Proceedings of the 2001 ASME International Mechanical Engineering Congress & Exposition, Active Vibration Isolation and Control II, New York, NY, Nov. 11-16, 2001.
LAGOUDAS, D.C., “The Use of Averaging Schemes to Estimate the Macroscopic Constitutive Behavior of Porous Shape Memory Alloys,” Proceedings of the 2001 Mechanics and Materials Conference, Physics, Mechanics and Modeling of Phase Transformations, San Diego, CA, June 26-29, 2001.
LAGOUDAS, D.C. and ENTCHEV, P.B., “Micromechanical Modeling of the Behavior of Porous Shape Memory Alloys,” Proceedings of the 6^th National Congress of Mechanics, Hellenic Society of Theoretical and Applied Mechanics, Vol. 2, 120-125, Thessaloniki, Greece, July 19-21, 2001.
LAGOUDAS, D.C., ENTCHEV, P.B., and VANDYGRIFF, E.L., “Fabrication, Modeling and Characterization of Porous Shape Memory Alloys,” Proceedings of SPIE 2001, Active Materials: Behavior and Mechanics, Vol. 4333, 141-150, Newport Beach, USA, March 5-8, 2001.
BRINSON, L.C., JACOBS, J.H., and LAGOUDAS, D.C., “Smart Materials Technology for the 21^st Century- The Future of Modeling and Design Tools,” Institute for Defense Analyses Defense Science Study Group, Volume 1, 105-131.

2000

LAGOUDAS, D.C., LI, C.C., MILLER, D.A., and RONG, L., “Thermomechanical Transformation Fatigue of SMA Actuators,” Proceedings of ASME IMECE, Adaptive Structures and Material Systems, 1-11, Orlando, FL, November 5-10, 2000.
LAGOUDAS, D.C., ENTCHEV, P.B., QIDWAI, M.A., and DeGIORGI, V.G., “Micromechanics of Porous Shape Memory Alloys,” Proceedings of ASME IMECE, Adaptive Structures and Material Systems, 41-50, Orlando, FL, November 5-10, 2000.
ENTCHEV, P.B., LAGOUDAS, D.C., QIDWAI, M.A., and DeGIORGI, V.G., “Porous Shape Memory Alloys, Part II: Modeling of the Thermomechanical Response,” Proceedings of the American Society of Composites Meeting, College Station, TX, September 24-27, 2000.
VANDYGRIFF, E.L., LAGOUDAS, D.C., THANGARAJ, and Y.C. CHEN, “Porous Shape Memory Alloys, Part I: Fabrication and Characterization,” Proceedings of the American Society for Composites Meeting, College Station, TX, 239-247, September 24-27, 2000.
LAGOUDAS, D.C., ENTCHEV, P.B., VANDYGRIFF, E.L, QIDWAI, M.A., DEGIORGI, V.G., “Modeling of Thermomechanical Response of Porous Shape Memory Alloys,” Proceedings of SPIE 2000, Active Materials: Behavior of Mechanics, Vol. 3992, 496-508.
LAGOUDAS, D.C., STRELEC, J.K., YEN, J., and KAHN, M.A., “Intelligent Design Optimization of a Shape Memory Alloy Actuated Reconfigurable Wing,” Proceedings of SPIE 2000, Smart Structures and Materials 2000: Mathematics and Control in Smart Structures, Vol. 3984, 338-348.
LAGOUDAS, D.C., LI, C.C., MILLER, D.A., and RONG, L., “Thermomechanical Transformation Fatigue of SMA Actuators,” Proceedings of SPIE 2000, Active Materials: Behavior of Mechanics, Volume 3992, 420-429.
REDINIOTIS, O.K., LAGOUDAS, D.C., and L.N. WILSON, “Development of a Shape-Memory-Alloy Actuated Biomimetic Hydrofoil,” 38^th AIAA Aerospace Sciences Meeting and Exhibit, 10-13 January 2000.

1999

LAGOUDAS, D.C., REDINIOTIS, O.K., and KHAN, M.M., “Applications of Shape Memory Alloys to Bioengineering and Biomedical Technology,” Proceedings of the 4^th International Workshop on Mathematical Methods in Scattering Theory and Biomedical Technology, Perdika, Greece, October 8-10, 1999, 195-207.
REDINIOTIS, O.K., LAGOUDAS, D.C., GARNER, L.J., WILSON, L.N., WEBB, G., GALLS, S., and SCHAEFFLER, N.W., “Application of Active Materials and Neural Networks to Aquatic Biomimetics,” Proceedings of the 11^th International Symposium on Unmanned Untethered Submersible Technology, 93-101, August 23-25, 1999.
LAGOUDAS, D.C., GARNER, L.J., REDINIOTIS, O.K., WILSON, N., “Modeling and Experiments of the Hysteretic Response of an Active Hyrdrofoil Actuated by SMA Line Actuators,” Smart Structures – Requirements and Potential Applications in Mechanical and Civil Engineering, Edited by Jan Holnicki-Szulc and J. Rodellar, NATO Sciences Series, Kluwer, Vol. 65, 153-162.
YAPURA, C., GRIFFIN, R., and LAGOUDAS, D., “Mechanics of Materials Experiments via the Internet,” National Instruments Week, Aug. 1999, Austin, TX.
LAGOUDAS, D.C. and QIDWAI, M.A., “Constitutive Modeling of 3-D Stress Induced Phase Transformation in Polycrystalline NiTi SMA,” Proceedings of IMECE ’99, May 1999.
WEBB, G.V., LAGOUDAS, D.C., and KULKARNI, M., “Adaptive Shape Control for an SMA-Actuated Aerofoil Rib Structure,” Proceedings of IMECE ’99, May 1999.
WEBB, G.V., WILSON, N., LAGOUDAS, D., and REDINIOTIS, O., “Control of SMA Actuators in Dynamic Environments,” published in the Proceedings of the 1999 SPIE Meeting on Smart Structures and Materials, Vol. 3667, 278-289, Newport Beach, CA.
REDINIOTIS, O.K., LAGOUDAS, D.C., GARNER, L.J., and WILSON, L.N., “Development of a Spined Underwater Biomimetic Vehicle with SMA Actuators,” published in the Proceedings of the 1999 SPIE Meeting on Smart Structures and Integrated Systems, Vol. 3668, 642-653, Newport Beach, CA.
LAGOUDAS, D.C., and MILLER, D.A., “Experiments of Thermomechanical Fatigue of SMAs,” Proceedings of the 1999 SPIE Meeting, Vol. 3675, 275-282, Newport Beach, CA.
MILLER, D.A., LAGOUDAS, D.A., EVARD, M.E., VOLKOV, A.E., “Influence of Plastic Strain on the Shape Memory Effect of NiTi Wires,” Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, Plasticity ’99, Edited by A. Khan, 247-250.
LAGOUDAS, D.C., IMBRIE, P.K., ENTCHEV, P.B., SLATTERY, J.C., DHORI, P., “Environmental Effects on Titanium Alloys and Composites,” Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, Plasticity ’99, Edited by A. Khan, 815-818.
LAGOUDAS, D.C., QIDWAI, M.A., and BO, Z., 1999, “Numerical Implementation of a Thermomechanical Constitutive Model for SMAs Under Cyclic Loading,” Constitutive and Damage Modeling of Inelastic Deformation and Phase Transformation, Plasticity ’99, Edited by A. Khan, 231-234.

1998

LAGOUDAS, D.C., “Symposium on “Mechanics in a Restructured Engineering Curriculum,” sponsored by Mechanics Education Committee of ASME, Applied Mechanics Division, November 1998, Anaheim, CA.
LAGOUDAS, D.C., WHITCOMB, J.D., MILLER, D.A., and LAGOUDAS, M.Z., 1998, “Technology Enabled Continuum Mechanics in a Restructured Engineering Undergraduate Curriculum,” IMECE 98, Symposium on “Mechanics in a Restructured Engineering Curriculum,” November 1998, Anaheim, CA.
REDINIOTIS, O.K., LAGOUDAS, D.C., GARNER, L.J., and WILSON, N., 1998, “Experiments and Analysis of an Active Hydrofoil with SMA Actuators,” Proceedings of the 36^th AIAA Aerospace Sciences Meeting and Exhibit, January 12-15, 1998.
LAGOUDAS, D.C., ENTCHEV, P., TRIHARJANTO, R., 1998, “Modeling of Oxidation and its Effect on the Crack Growth Resistance of Titanium Alloys,” Damage Mechanics in Engineering Materials, Elsevier Science Publishers, 421-440.
BO, Z., LAGOUDAS, D.C., 1998, “Modeling of Cyclic Thermomechanical Response of Polycrystalline Shape Memory Alloys,” Proceedings of the 1997 IUTAM Conference on Micromechanics of Composites and Active Materials, 109-122.
FOULK, J.W., ALLEN, D.H., LAGOUDAS, D.C., 1998, “A Micromechanical Model for Predicting Fatigue Response of Metal Matrix Composites Subjected to Environmental Degradation,” Proceedings of the 1997 IUTAM Conference on Micromechanics of Composites and Active Materials, 17-31.
ALLEN, D.H., FOULK, J.W., HELMS, K.L.E., and LAGOUDAS, D.C., 1998, “A Modeling for Predicting the Effect of Environmental Degradation on Damage Evolution in Metal Matrix Composites,” Proceedings of the ASTM-STP Symposium on Applications of Continuum Damage Mechanics to Fatigue and Fracture, STP 1315, 29-45.

1997

LAGOUDAS, D.C. and BHATTACHARYYA, A., 1997, “Performance Analysis of Thin Layer Extensional Thermoelectric SMA Actuators,” Proceedings of the 1997 SPIE Conference, Vol. 3039, 254-267.
JONNALAGADDA, J.D., SOTTOS, N.R., QIDWAI, M.R., and LAGOUDAS, D.C., 1997, “Transformation of Embedded Shape Memory Alloy Ribbons,” Proceedings of the 1997 SPIE Conference, Vol. 3039, 242-253.
REDINIOTIS, O.K., LAGOUDAS, D.C., MASHIO, T., GARNER, L.J., and QIDWAI, M.A., 1997, “Theoretical Experimental Investigations of an Active Hydrofoil w/SMA Actuators,” Proceedings of the 1997 SPIE Conference, Vol. 3039, 277-289.
LAGOUDAS, D.C., WHITCOMB, J.D., LAGOUDAS, M.Z., and MILLER, D.M., 1997, “Computer Aided Teaching of Continuum Mechanics to Undergraduates,” Proceedings of the 1997 ASEE/GSW Annual Conference, The University of Houston, March 23-25, 1997, 25-30.
LAGOUDAS, D.C., XU, S., MILLER, D., and ALLEN, D., 1996, “Damage in Oxidized Titanium Metal Matrix Composites,” Proceedings of the ASME Aerospace and Materials Divisions, AD-Vol. 51, MD-Vol. 73, 225-237.

1996

LAGOUDAS, D.C., BO, Z., and BHATTACHARYYA, A., 1996, “A Thermodynamic Constitutive Model for Gradual Phase Transformation of SMA Materials,” Proceedings of Mathematics and Control in Smart Structures, SPIE Vol. 2715, 482-493.
SOTTOS, N.R., KLINE, G.E., QIDWAI, M.A., and LAGOUDAS, D.C., 1996, Analysis of Phase Transformation Fronts in SMA Composites,” Proceedings of Mathematics and Control in Smart Structures, SPIE Vol. 2715, 427-438.
LAGOUDAS, D.C., GRIFFIN, R.B., EVERETT, L., KEATING, P., and PARKER, D., 1996, “The Implementation of a Sophomore Engineering Integrated Curriculum,” Proceedings of the 1996 ASEE/GSW Annual Conference, The University of Texas at San Antonio, March 27-29, 1996, 270-275.
LAGOUDAS, D.C., MOORTHY, D., QIDWAI, M.A., and REDDY, J.N., 1996, “Modeling of the Thermomechanical Response of Active Composite Laminates with SMA Layers,” Proceedings of The 2^nd National Congress on Computational Mechanics.
BO, ZHONGHE and LAGOUDAS, D.C., 1996, “Phase Transformation Localization in SMA wires,” Contemporary Research in the Mechanics and Mathematics of Materials, R.C. Batra and M.F. Beatty, eds., International Center for Numerical Methods in Engineering (CIMNE), Barcelona, 263-274.
MA, XINZHENG and LAGOUDAS, D.C., 1996, “Damage Modeling of Metal Matrix Composite Laminates with Cracked Oxide Surface Layers,” Damage and Interfacial Debonding in Composites, Studies in Applied Mechanics, Vol. 44, G.Z. Voyiadjis and D.H. Allen, eds., Elsevier, Amsterdam, 57-80.

1995

ALLEN, D., HELMS, K., HURTADO, L., and LAGOUDAS, D.C.,1995, “Prediction of Damage Evolution in Continuous Fiber Metal Matrix Composites Subjected to Fatigue Loading,” Proceedings of the Symposium on Recent Development in Engineering Science, Society of Engineering Science (SES) 32^nd Annual Technical Meeting, New Orleans, Oct. 29 – Nov. 1, 1995.
BHATTACHARYYA, A., and LAGOUDAS, D.C., 1995, “A Mean-Field Framework for the Characterization of SMA Polycrystals with Material Uncertainties,” Innovative Processing and Characterization of Composite Materials, NCA-Vo. 201/AMD.Vol.211, Ronald F. Gibson, Tsu-Wei Chou and P.K. Raju, eds., American Society of Mechanical Engineers, New York, 143-158.
XU, SHOUZE, LAGOUDAS, D.C., and ALLEN, D., 1995, “The Effects of Oxidation and Damage on the Mechanical Response of Metal Matrix Composites,” in proceedings of the ASME Materials Division, Vol. 1, MD-Vol. 69-1, R.C. Batra, T.W. Wright, G.S. Bhat and T.S. Srivatson, eds., New York, 201-214.
BO, Z., and LAGOUDAS, D.C., 1995, “A Thermodynamic Constitutive Model for Cyclic Loading of Shape Memory Alloy Materials with Application to Two Way Training,” Smart Structures and Materials 1995: Smart Materials, A. Peter Jardine, ed., Proc. SPIE 2441, SPIE -The International Society for Optical Engineering, Bellingham, Washington, 118-130.
XU, G., LAGOUDAS, D.C., WEN, J.T., and HUGHES, D., 1995, “Thermo-electro-mechanical Modeling and Structural Response of a Flexible Beam with External SMA Actuators, Smart Structures and Materials 1995: Mathematics and Control in Smart Structures, Vasundara V. Varadan, ed., Proc. SPIE 2442, SPIE -The International Society for Optical Engineering, Bellingham, Washington, 503-515.
de BLONK, B., KURDILA, A.J., LAGOUDAS, D.C., and WEBB, G., 1995, “Identification of the Transient Response of SMA Embedded Flexible Rods”, Smart Structures and Materials 1995: Smart Structures and Integrated Systems, Inderjit Chopra, ed., Proc. SPIE 2443, SPIE -The International Society for Optical Engineering, Bellingham, Washington, 349-359.
BHATTACHARYYA, A., and LAGOUDAS, D.C., 1995, “The Probabilistic Influence of Material Uncertainties on the Inelastic Response of SMA Composites,” in Recent Advances in Composite Materials, S.R. White, H.T. Hahn and W.F. Jones, eds. the American Society of Mechanical Engineers, New York, 237-251.
XU, S., LAGOUDAS, D.C., and ALLEN, D.H., 1995, “Impact of Surface Oxidation on Damage Evolution in Metal Matrix Composites,” in Micromechanics and Constitutive Modelling of Composite Materials AMD-Vol. 202/MD-Vol. 61, Hussein M. Zbib, Ismail Demir and Hong-Tao Zhu, eds., the American Society of Mechanical Engineers, New York, 237-251.

1994

BOYD, J.G., and LAGOUDAS, D.C., 1994, “A Thermodynamical Study of the Two-Way Shape Memory Effect in Active Composites,” Mechanics of Materials and Electronic Packaging: Volume 3, Coupled Field Behavior in Materials, AMD-Vol. 193, M.L. Dunn, M. Taya, and M. Saka, eds., American Society of Mechanical Engineers, New York, 77-102
BOYD, J.G., and LAGOUDAS, D.C., 1994, “A Constitutive Model for Simultaneous Transformation and Reorientation in Shape Memory Materials,” Mechanics of Phase Transformations and Shape Memory Alloys, AMD-Vol. 189/PVP-Vol. 292, L.C. Brinson and B. Moran, eds., American Society of Mechanical Engineers, New York, 159‑177.
BO, Z., and LAGOUDAS, D.C., 1994, “Comparison of Different Thermomechanical Models for Shape Memory Alloys,” Adaptive Structures and Composite Materials: Analysis and Application, AD-Vol. 45/MD-Vol. 54, E. Garcia, H. Cudney, and A. Dasgupta, eds., American Society of Mechanical Engineers, New York, 9‑19.
LAGOUDAS, D.C., ALLEN, D.H., and MA, X., 1994, “Modeling of Surface Oxidation and Oxidation Induced Damage in Metal Matrix Composites,” Computational Material Modeling, AD-Vol. 42, PVP-Vol. 294, A.K. Noor and A. Needleman, eds., American Society of Mechanical Engineers, New York, 245-264.
BHATTACHARYYA, A., LAGOUDAS, D.C., WANG, Y., and KINRA, V.K., 1994, “Thermoelectric Cooling of Shape Memory Alloy Actuators: Theoretical Modeling and Experiments”, in Active Materials and Smart Structures, G.L. Anderson and D.C. Lagoudas, eds., Proc. SPIE 2427, SPIE—The International Society for Optical Engineering, Bellingham, Washington, 198-217.
BO, Z., and LAGOUDAS, D.C., 1995, “A Unified Thermodynamic Constitutive Model and Finite Element Analysis of Active Metal Matrix Composites,” in Active Materials and Smart Structures, G.L. Anderson and D.C. Lagoudas, eds., Proc. SPIE 2427, SPIE—The International Society for Optical Engineering, Bellingham, Washington, 276‑288.
BO, Z., KURDILA, A.J., LAGOUDAS, D.C., and WEBB, G., 1995, “Identification for a Class of Nonlinear Models for Shape Memory Alloy (SMA) Embedded Elastomeric Rods,” in Active Materials and Smart Structures, G.L. Anderson and D.C. Lagoudas, eds., Proc. SPIE 2427, SPIE—The International Society for Optical Engineering, Bellingham, Washington, 93‑106.
De BLONK, B., and LAGOUDAS, D.C., 1994, “Configurations of Active Flexible Rods with Embedded Shape Memory Alloy Actuators,” in proceeding of the First International Conference on Composite Engineering, David Hui, ed., ICCE/I-the International Community of Composites Engineering, 275-276.
LAGOUDAS, D.C., BO, Z., and QIDWAI, M.A., 1994, “Micromechanics of Active Metal Matrix Composites with Shape Memory Alloy Fibers,” in Inelasticity and Micromechanics of Metal Matrix Composites, Studies in Applied Mechanics Vol. 41, G.Z. Voyiadjis and J‑W. Ju, eds., Elsevier, Amsterdam, 163‑190.
BOYD, J.G., and LAGOUDAS, D.C.,1994, “Microthermodynamics Analysis of the Shape Memory Effect in Composite Materials,” in Proceedings of the Second International Conference on Intelligent Materials, Colonial Williamsburg PA, June 5‑8, 1994, C.A. Rogers and G.G. Wallace, eds., Technomic Publishing Co., Inc., Lancaster, Pennsylvania, 198‑209.
BO, Z., and LAGOUDAS, D.C., 1994, “Deformations and Thermal Response of Active Flexible Rods with Embedded SMA Actuators,” in Smart Structures and Materials 1994: Smart Structures and Intelligent Systems, N.W. Hagood, ed., Proc. SPIE 2190, SPIE—The International Society for Optical Engineering, Bellingham, Washington, 495‑505.
BOYD, J.G., and LAGOUDAS, D.C., 1994, “A Thermodynamical Constitutive Model for the Shape Memory Effect Due to Transformation and Reorientation,” in Smart Structures and Materials 1994: Smart Materials, V.K. Varadan, ed., Proc. SPIE 2189, SPIE—The International Society for Optical Engineering, Bellingham, Washington, 276‑288.

1993

LAGOUDAS, D.C., and BO, Z., 1993, “Active Hybrid Composite Laminates with Piezoelectric and Shape Memory Alloy Layers,” Presentation Materials from the First Workshop on Smart Structures, University of Texas at Arlington, 22-24 September 1993, 10 , (no page numbers in volume).
BOYD, J.G., and LAGOUDAS, D.C., 1993, “A Micro-thermodynamics Analysis of Shape Memory Alloy Composites,” Presentation Materials from the First Workshop on Smart Structures, University of Texas at Arlington, 22-24 September 1993, 14 , (no page numbers in volume).
PFAEFFLE, H.J., CRAIG, K.C., and LAGOUDAS, D.C., 1993, “Active Flexible Thick Cylinders with Embedded Shape Memory Alloy Actuators,” Presentation Materials from the First Workshop on Smart Structures, University of Texas at Arlington, 22-24 September 1993, 8 , (no page numbers in volume).
BOYD, J.G., and LAGOUDAS, D.C., 1993, “Thermomechanical Response of Shape Memory Composites,” in Smart Structures and Materials 1993: Smart Structures and Intelligent Systems, N. W. Hagood, and G.J. Knowles, eds., Proc. SPIE 1917, 774‑790.
PFAEFFLE, H.J., LAGOUDAS, D.C., TADJBAKHSH, and CRAIG, K.C., 1993, “Design of Flexible Rods with Embedded SMA Actuators,” in Smart Structures and Materials 1993: Smart Structures and Intelligent Systems, N. W. Hagood, and G.J. Knowles, eds., Proc. SPIE 1917, 762‑773.
JEONG, G.S., ALLEN, D.H., and LAGOUDAS, D.C., 1993, “Residual Stress Evolution due to Cool-Down in Viscoplastic Metal Matrix Composites,” Thermomechanical Behavior of Advanced Structural Materials, AD-Vol. 34, AMD-Vol. 173, W.F. Jones, ed., American Society of Mechanical Engineers, New York, 17-31.
MILLER, D.A., LAGOUDAS, D.C., and ALLEN, D.H., 1993, “Experimental Study of Damage Evolution in SiC/Ti Laminates with Different Heat Treatments, proceedings of 4th International Symposium on Plasticity and its Current Applications, Baltimore MD, 19-23 July 1993.
BOYD, J.G., and LAGOUDAS, D.C., 1993, “A Thermodynamically Based Constitutive Model for the SME Due to Transformation and Reorientation,” proceedings of 4th International Symposium on Plasticity and its Current Applications, Baltimore MD, 19-23 July 1993.
LAGOUDAS, D.C., and BO, Z., 1993, “Stress Induced Phase Transformations in Piezoelectric Laminates with Shape Memory Alloy Layers,” Recent Development in Stability, Vibration, and Control of Structural Systems, AMD-Vol. 167, A. Guran, ed., American Society of Mechanical Engineers, New York, 107-118.
LAGOUDAS, D.C., and TADJBAKHSH, I.G., 1993, “Deformations of Active Flexible Rods with Embedded Line Actuators,” Recent Development in Stability, Vibration, and Control of Structural Systems, AMD-Vol. 167, A. Guran, ed., American Society of Mechanical Engineers, New York, 89-106.

1992

TADJBAKHSH, I.G., and LAGOUDAS, D.C., 1992, “Variational Theory of Dynamic Deformations of the Curved and Twisted Elastica,” proceedings of the Tenth Army Conference on Applied Mathematics and Computing, 16-19 June 1992, West Point NY.
LAGOUDAS, D.C., and HUANG, C.-M., 1992, “Damage Evolution in the Gauge Theory with Applications to Fibrous Composites,” Damage Mechanics in Composites, AMD-Vol. 150/AD-Vol. 32, D.H. Allen and D.C. Lagoudas, eds., American Society of Mechanical Engineers, New York, 91-102.
LAGOUDAS, D.C., 1992, “On the Geometry and Kinematics of the Gauge Theory of Defects for Media with Microstructure,” Defects and Anelasticity in the Characterization of Crystalline Solids, AMD-Vol. 48, L.M. Brock, ed., American Society of Mechanical Engineers, New York, 81-91.
HUANG, C.-M., and LAGOUDAS, D.C., 1992, “Progressive Brittle Damage Modeling of Fibrous Composites by Micromechanics Based Failure Surfaces,” in Damage in Composite Materials, Studies in Applied Mechanics Vol. 34, G.Z. Voyiadjis, ed., Elsevier, Amsterdam, 181-193.
BRUNSKI, J.B., LAGOUDAS, D.C., and HINGE, K.C., 1992, “An Interdisciplinary Core Course in Statics, Linear Algebra and Computing as Part of the Pre‑Engineering Curriculum at Rensselaer Polytechnic Institute,” proceedings of Engineering Foundation Conference on Engineering Education: Curriculum Innovation and Integration, January 5‑10, 1992, Santa Barbara CA.

1991

SALEH, A.M., and LAGOUDAS, D.C., 1991, “Modeling of Compressive Failure Due to Kinking in Cross‑Ply Laminates under Cylindrical Bending,” Plastic and Plastic Composites: Mechanical Properties, Part Performance, and Process Simulation, MD Vol. 29, V.J. Stokes, ed., American Society of Mechanical Engineers, New York, 181‑193.
LAGOUDAS, D.C., and TADJBAKHSH, I.G., 1991, “Active Flexible Rods with Embedded SMA Fibers,” proceedings of ADPA/AIAA/ASME/SPIE Conference on Active Materials and Adaptive Structures, November 4‑8, 1991, Alexandria VA, IOP Publishing Ltd., Bristol, England, 911‑916.
LAGOUDAS, D.C., and SALEH, A.M., 1991, “Geometry and Loading Effects on the Compressive Strength of Fibrous Composites,” proceedings of the American Society for Composites Sixth Technical Conference: Composite Materials, Mechanics and Processing, Technomic, Lancaster PA, 671‑680.
LAGOUDAS, D.C., and SALEH, A.M., 1991, “Comparison Between Compressive Strength Due to Microbuckling and Kinking in Fibrous Composites,” Composites: Design, Manufacture, and Application, proceedings of the Eighth International Conference on Composite Materials (ICCM/8), S.W. Tsai and G.S. Springer, eds., SAMPE, Covina CA, 35‑E1‑1‑14.
LAGOUDAS, D.C., and GAVAZZI, A.C., 1991, “Incremental Elastoplastic Behavior of Metal Matrix Composites Based on Averaging Schemes,” Inelastic Deformation of Composite Materials, G.J. Dvorak, ed., Springer‑Verlag, New York, 1991, 465‑485.

1990

AHMAD, H., and LAGOUDAS, D.C., 1990, “Effective Elastic Properties of Fiber‑Reinforced Concrete with Random Fibers,” ASCE Specialty Conference on Advanced Composites for Civil Engineering.
LAGOUDAS, 1990, “A Gauge Theory of Brittle Damage,” Microcracking-Induced Damage in Composites, AMD-Vol. 111/MD-Vol. 22, G.J. Dvorak and D.C. Lagoudas, eds., American Society of Mechanical Engineers, New York, 77‑86.
DVORAK, G.J., LAGOUDAS, D.C., and HUANG, C.‑M., 1990, “Fatigue Damage of Metal Matrix Composite Laminates: Bimodal Theory and Damage Optimization,” Microcracking Induced Damage in Composites, AMD-Vol. 111/MD-Vol. 22, G.J. Dvorak and D.C. Lagoudas, eds., American Society of Mechanical Engineers, New York, 41‑54.

1989

AKSEL, B., LAGOUDAS, D.C., and HUI, C.‑Y., 1989, “Effects of a Frictional Interface on the Load Diffusion from a Broken Filament in a Fibrous Composite,” Materials Research Society Symposium Proceedings Vol. 170, C.G. Pantano and E.J.H. Chen, eds., Materials Research Society, Pittsburgh, 59‑64.

1988

LAGOUDAS, D.C., HUI, C.‑Y., and PHOENIX, S.L., 1988, “The Shear‑Lag Model for a Unidirectional Composite with Viscoelastic Matrix,” Transactions of the Fifth Army Conference on Applied Mathematics and Computing, ARO Report 88‑1, 87‑109.

1987

HUI, C.‑Y., LAGOUDAS, D.C., and RUINA, A., 1987, “Constitutive Models for Crazes and their Effects on Crack Growth in Glassy Polymers,” Constitutive Modeling of Nontraditional Materials AMD‑Vol. 85, V. Stokes and D. Krajcinovic, eds., ASME, New York, 87‑115.

1985

EDELEN, D.G.B., and LAGOUDAS, D.C., 1985, “The Crooked Road to Effective Stress,” proceedings of the 6th Symposium on Trends in Applications of Pure Mathematics to Mechanics, E. Kroner and K. Kirchgassner, eds., Springer‑Verlag, Berlin, 233‑245.